F1 23 Australia Setup: Online, career mode, and My Team settings

F1 23 Australia setup

F1 23 Australia setup

Australia has been relegated to third in the calendar in 2023, and there have also been changes around the track. With the new layout, this F1 23 Australia setup will see you dominate Down Under.

With F1 24 right around the corner, now's the best time to get those final laps in ahead of this year's release.

F1 23 Australia setup

The Albert Park circuit saw major renovations in 2022, opening the circuit up and creating a fast, flowing piece of tarmac in the heart of Melbourne. The changes have made the track more akin to Silverstone, with fast, sweeping corners where heavy braking zones used to be.

With F1 23's many patches changing the ways the cars feel, we've updated our Australia update to give you the best chance around Albert Park.

Aerodynamics

An aerodynamic setup of 30-26 will help keep the car planted through the fast corners.

F1 23 Australia setup aerodynamics
expand image

The front wing bias will also assist with turning into the slower corners.

Transmission

This controls how the rear wheels are allowed to rotate. We have gone with 53% on-throttle and 52% off-throttle for the transmission settings.

F1 23 Australia setup transmission
expand image

This will give the car plenty of rotation without punishing you for getting on the power too quickly.

Suspension geometry

We've gone with -2.60 and -1.00 for the camber. This will maintain speed through the switchbacks around Albert Park.

F1 23 Australia setup suspension geometry
expand image

A front toe of 0.03 and a rear toe of 0.12 will help get heat into the tyres whilst also assisting with turn in.

Suspension

We've set the suspension to 23-3 and the anti-roll bars to 6-1. This will allow the car to handle the switchbacks without losing control.

F1 23 Australia setup suspension
expand image

Ride height is set to 34-37 to avoid some of the harsher kerbs. This also works well with the aerodynamic setup.

Brakes

We recommend 100% brake pressure and 55% brake bias for Australia.

F1 23 Australia setup brakes
expand image

This will give you the best stopping performance without always locking up.

Tyres

We suggest setting your front tyres to 22.6 PSI and your rears to 20.2 PSI.

F1 23 Australia setup tyres
expand image

This will give good performance when needed without draining the tyre life too much on longer stints.

Adjustments

These setups are intended for intermediate players who may still be using assists like traction control and ABS. However, if you are looking for an extra edge then you can try a few of these adjustments:

  • Decrease the wing levels by 1-3 clicks to improve top speed
    • This will make the car less capable on turn-in and less stable in high-speed direction changes
  • If the car doesn't feel like it is doing what you want on turn-in then raise the front wing a click or two
  • If the car is too loose at low speeds try moving the off-throttle differential for more stability
  • For a more "pointy" car stiffen the front suspension & anti-roll bar
    • This will make getting traction trickier
  • Don't be afraid to move brake bias during the lap. More frontward will give better performance in heavy braking zones, and a rearward for lighter braking zones
    • Lockups are easier to achieve in F1 23 than previous games. Front locking is less catastrophic than rear locking, and which way you go from our mark will increase your chances of a lockup in that direction
  • Add a click of tyre pressure for short online races to improve tyre warm-up!
This Article's Topics

Explore new topics and discover content that's right for you!

F1
Have an opinion on this article? We'd love to hear it!